Memory Lane Beanie by Heli Hottinen-Puukko

Memory Lane Beanie

Knitting
February 2026
both are used in this pattern
yarn held together
Lace
+ Fingering
= Fingering (14 wpi) ?
27 stitches and 32 rows = 4 inches
in cable
230 - 250 yards (210 - 229 m)
1 (2) 3
English Finnish
This pattern is available for €5.50 EUR buy it now

Memory Lane Beanie pattern is coming is live! Enjoy 20 % introductory discount till Wednesday 25th Midnight Helsinki time!

This cable-knit beanie features the same textured stitch elements as the Memory Lane series. The sculptural cables create medallion-like motifs that give the design a timeless, almost heirloom feel. It’s a cozy accessory that wraps warmth—and memories—around you, stitch by stitch.

The Memory Lane Beanie is worked from the bottom up. The hat is worked first with a ribbed brim for a comfortable fit, followed by the cable pattern worked according to a chart or written instructions. The final size of the beanie depends on the needle size and yarn weight used: the smallest size fits a child or young adult with head circumference around 48 cm/19”, size 2 fits head circumference 53 cm/20.75”, and size 3 fits head circumference 56/22”. Sizes 1–2 can be knitted with a single strand of fingering or sport-weight yarn held together with one strand of silk mohair, while size 3 is worked with two strands of Setasuri or silk mohair held together with one strand of sport-weight yarn. By adjusting your yarn choices, you can create a beanie that fits well and feels light and airy or richly warm and cozy.

Sizes: 1 (2) 3
To fit head circumference 48 (53) 56 cm/ 19 (20.75) 22”
Recommended negative ease: 5-9 cm/ 2-3.75”

FINISHED MEASUREMENTS
Hat circumference gently blocked
41 (44) 47 cm / 14.5 (18) 19”
Hat total length
30.5 (33) 35.5 cm / 12 (13) 14”
Length when brim is folded
Approximately 23 (25) 27 cm / 9 (9.75) 10.75”
You can modify the length with brim length

Gauge
29 (27) 26 sts = 10 cm / 4x4” in cable pattern after blocking with US 4 / 3.5 mm (US 6 / 4 mm) US 7 / 4.5 mm needles.

Yarn
Size 1: You are holding one strand of Sandnes Garn Tynn Peer Gynt together with one strand of Silk mohair.
Sandnes Garn Tynn Peer Gynt 100 % wool, 50 g = 205 m / 224 yds), 1 ball or 205 m / 224 yds, worked in color 2650, together with Sandnes Garn Tynn Silk Mohair, 57 % mohair, 28 % silk, 15 % wool 25 g = 212 m / 231 yds), 1 ball or 25 g or 212 m / 231 yds, worked in color 302. Or instead use one thread of DK weight yarn to get the gauge.

Size 2: You are holding one strand of Sandnes Garn Tynn Peer Gynt together with one strand of Silk mohair.
Sandnes Garn Tynn Peer Gynt 100 % wool, 50 g = 205 m / 224 yds), 2 balls or 245 m / 267 yds, worked in color 2650, together with Isager Silk Mohair, 75 % kid mohair, 25 % silk, 25 g = 212 m / 231 yds), 2 balls or 30 g or 257 m / 281 yds, worked in color 0. Or instead use one thread of DK weight yarn to get the gauge.

Size 3: You are holding one strand of Alpaca Yarn together with two strands of Setasuri.
2 balls of Drops Alpaca Uni Color (100 % Alpaca, 50 g = 167 m / 183 yds) 60 g or 200 m/218 yds, worked in color 100, together with 3 balls of Setasuri (69 % Alpaca (Suri), 31 % Silk, 25 g = 212 m) 55 g or 470 m/ 513 yds, worked in color 001. Or instead use one thread of DK weight yarn together with one strand of silk mohair to get the gauge.
Note! Once you have finished the first two balls of Setasuri, you can continue holding Setasuri yarn double by working with one strand from outside and one strand from the center of the last ball.

Needles:
US 4 / 3.5 mm (US 6 / 4 mm) US 7 / 4.5 mm (16” / 40 cm) circular needle for the cable pattern and DPNs for the crown
US 3 / 3 mm (US 4 / 3.5 mm) US 6 / 4 mm (16” / 40 cm) circular needle for the rib

Notions: Cable needle, stitch marker(s), tapestry needle

Construction: The beanie is worked from bottom to top.

Techniques used in this pattern:
Rib: Knit 1, purl 1, repeat at the end of the rnd
Cable patterns worked in the round: follow the written instructions and/or Chart. Make the cable crossings according to the chart.


Memory Lane Beanie -pipon ohje on julkaistu ja saat siitä 20 % early bird -alen keskiviikkoon 15.2. keskiyöhön saakka!

Palmikkoneulemyssyssä toistuvat samat pintaneule-elementit kuin Memory Lane ja Muistojen medaljongit -neuleperheessä. Kohokuvioiset palmikot muodostavat korumaisia, medaljonkeja muistuttavia kuvioita, jotka tuovat myssyyn ajattoman ja hieman nostalgisen tunnelman. Pehmeä ja lämmin asuste kuljettaa muistoja mukanaan, silmukka kerrallaan.

Memory Lane Beanie neulotaan alhaalta ylös. Ensin neulotaan joustinneuleinen reunus, joka antaa pipolle hyvän istuvuuden, ja sen jälkeen siirrytään palmikkokuvioihin kaavion mukaan.
Pipon koko muotoutuu valittujen puikkojen ja langan paksuuden perusteella: pienin koko sopii hyvin lapselle tai nuorelle, koko 2 vastaa noin XS-kokoa ja koko 3 S/M-kokoa. Koot 1–2 voidaan neuloa yhdellä säikeellä fingering- tai sport-vahvuista lankaa yhdessä silkkimohairin kanssa, kun taas koon 3 pipo neulotaan kahdella säikeellä Setasuria tai silkkimohairia yhdessä sport-vahvuisen langan kanssa. Langanvalinnalla voit vaikuttaa pipon kokoon sekä ilmeeseen aina kevyestä ja ilmavasta täyteläiseen ja lämpimään.

Koot: 1 (2) 3
Päänympärys noin 48 (53) 56 cm
Suositeltu negatiivinen väljyys: 5-9 cm

Lopulliset mitat
Pipon ympärys viimeistelyn jälkeen
41 (44) 47 cm
Valmiin pipon korkeus
30.5 (33) 35.5 cm
Valmiin pipon korkeus, kun reuna on taitettu
Noin 23 (25) 27 cm
Voit säätää pipon pituutta joustimen korkeudella

Neuletiheys
29 (27) 26 s = 10 cm palmikkoneuletta 3.5 mm (4 mm) 4.5 mm puikoilla.

Puikot:
3,5 mm (4 mm) 4.5 mm (40 cm) pyöröpuikot palmikkoneuleeseen ja sukkapuikot hatun yläosaan
3 mm (3.5 mm) 4 mm (40 cm) pyöröpuikot joustinneuleeseen

Lanka
Koko 1: Työssä on yksi säie Sandnes Garn Tynn Peer Gynt -lankaa yhdessä yhden silkkimohairlangan säikeen kanssa.
Sandnes Garn Tynn Peer Gynt 100 % wool, 50 g = 205 m), 1 kerä tai 205 m, värissä 2650,
Sandnes Garn Tynn Silk Mohair, 57 % mohair, 28 % silk, 15 % wool 25 g = 212 m), 1 kerä tai 25 g tai 212 m, värissä 302.
Näiden sijaan voit käyttää yhtä säiettä DK vahvuista lankaa.

Koko 2: Työssä on yksi säie Sandnes Garn Tynn Peer Gynt -lankaa yhdessä yhden silkkimohairlangan säikeen kanssa.
Sandnes Garn Tynn Peer Gynt 100 % wool, 50 g = 205 m), 2 kerää tai 245 m , worked in color 2650
Isager Silk Mohair, 75 % kid mohair, 25 % silk, 25 g = 212 m), 2 kerää tai 30 g tai 257 m, värissä 0. Näiden sijaan voit käyttää yhtä säiettä DK vahvuista lankaa yhdessä yhden mohairsäikeen kanssa.

Koko 3: Työssä on yksi säie Alpakkalankaa yhdessä Setasuri-langan kahden säikeen kanssa (kolme säiettä yhdessä).
2 kerää Drops Alpaca Uni Color (100 % Alpaca, 50 g = 167 m, 60 g tai 200 m, värissä 100
3 kerää Setasuri (69 % Alpaca (Suri), 31 % Silk, 25 g = 212 m) 55 g tai 470 m, värissä 001. Näiden sijaan voit käyttää yhtä säiettä DK vahvuista lankaa yhdessä yhden mohairsäikeen kanssa.
Huom! Kun kaksi ensimmäistä kerää Setasuria loppuvat, voit ottaa viimeisestä lankakerästä kaksinkertaisen langan ottamalla yhden säikeen kerän ulkopuolelta ja yhden säikeen kerän sisäpuolelta.

Huomioitavaa: palmikkopuikko, silmukkamerkki/merkit, päättelyneula

Rakenne: Pipo neulotaan alhaalta ylös.